Starting The Projector With A Password - Epson EX3200 User Manual

Hold down
note
If you leave the projector
plugged in, the Password
screen will not appear. It
appears only if you unplug
and reconnect the power
cord.
Hold down
Fine-Tuning the Projector
78
2. Select the type(s) of password protection you want to use:
■
Power On Protect
projector. After the projector is plugged in and turned on,
you must enter a password to use the projector. Select
press , then press
Enter
screen.
■ User's Logo Protect
page 79), display, and User's Logo settings in the Extended
menu from being changed. Select
to return to the Password Protect screen.
Esc
3. Use the arrow buttons to select
4. When you see a message asking if you want to change the
password, select
Yes
5. Hold down the
Num
a four digit password.
6. When you see a confirmation message, reenter the password.
7. Press the button, then press
Menu
8. Turn off and unplug the projector.

Starting the Projector With a Password

When the password function is enabled, you see this screen when you
plug in and turn on the projector:
Hold down the button and use the numeric keypad to enter the
Num
four digit password.
The password screen closes and projection begins.
: Prevents unauthorized use of the
to return to the Password Protect
Esc
: Prevents your custom screen (see
, press
On
and press
Password
and press .
Enter
button and use the numeric keypad to enter
to exit the screen.
Enter
,
On
, then press
Enter
.
Enter