Epson EX3200 User Manual page 76

note
Do not use the projector at
altitudes above 7,500 feet
(2,286 meters).
Fine-Tuning the Projector
76
■
Operation
Direct Power On:
projector when you connect the power cord (without pressing the
Ppower button).
: Enable if you want the projector to turn off
Sleep Mode
automatically if it is idle and no signal is received for 1 to 30
minutes (you can adjust the amount of time using the next
setting).
Sleep Mode Timer
period of time before the projector turns off automatically, from
1 to 30 minutes.
Lens Cover Timer
power off automatically when the
more than 30 minutes.
High Altitude Mode
above 4,921 feet (1,500 meters) to ensure that the temperature is
regulated properly. Turn this setting off for lower elevations.
■
Standby Mode
Select
Communication On
monitored and controlled from a computer when it is in standby
mode (the power light is orange).
■
USB Type B
Select how you want to use the USB port. Select
use the USB port to project computer images. Select
to use the remote control to advance PowerPoint slides.
Down
Select
Wireless Mouse
wireless mouse. See page 61 for restrictions and details.
■
Link 21L
Select to enable the projector to be monitored and controlled
On
from a computer using Link 21L software and the Epson USB
Communication driver.
■ Language
Select a language to use for the projector menus.
Enable if you want to be able to start the
: When Sleep Mode is on, you can set the
: Enabled by default to turn the projector's
A/V Mute
: Enable when you are using the projector
to enable the projector to be
to use the remote control buttons like a
slide is closed for
to
USB Display
Page Up/