Projector Placement Options - Epson EX3200 User Manual

note
After positioning the
projector, you may want to
connect a Kensington
®
MicroSaver anti-theft
device to the lock port on the
projector. You can purchase
this from Epson; see
.
page 18
Ceiling projection
Setting Up the Projector
30

Projector Placement Options

When projecting from the front, you should place the projector
directly in front of the center of the screen, facing the screen squarely.
The center of the lens should be about level with the bottom of the
screen.
If you place the projector below screen level, you may need to tilt it up
by extending the front adjustable foot. Tilting the projector causes the
image to become "keystone" shaped, but you can correct the
distortion (see page 51). The EX5200/EX7200 may be able to correct
the distortion automatically.
You can also install the projector in three other viewing setups: ceiling
projection, rear projection onto a semi-transparent screen, or rear/
ceiling projection.
Rear projection
To project from overhead, you'll need the optional ceiling mounting
hardware (see page 18). You'll also need to select the appropriate
setting in the projector's Extended menu to orient the
Projection
image correctly (see page 75).
Front projection
Rear/ceiling projection