Advertisement
Care of Your Steam Mop
fig. 14
fig. 15
AFTER USE AND STORAGE
1 W hen you have finished using the
steam mop, press the ON/STANDBY
switch until the LED light turns
flashing BLUE. This stops the unit
from steaming. Unplug the cord from
the outlet and place the mop into the
upright position. Let the unit cool for
2-3 minutes.
R emove the micro-fiber cleaning pad
by releasing the quick fasteners and
using the lavender loop on the side
of the pocket, avoiding contact with
the hot pad or dirt. (fig. 14)
10
TOLL FREE: 1-800-798-7398
fig. 16
2 E mpty the water tank before
storage. Remove the water tank cap
and empty the tank over a sink.
Replace the water cap. (fig. 15)
3 To store the Shark
Pro Steam
®
Pocket
Mop hanging up, first
®
remove the head (after it has cooled
and the steam has been released)
then hang on a large hook. (fig. 16)
IMPORTANT: Calcium and mineral
deposits can build up and impact
the performance of your steam mop
over time. To extend the life of your
product we recommend that you
use distilled water or Shark®'s
Water Filtration Bottle.
Visit www.SharkClean.com to order.
Also see page 11 for instructions on
how to decalcify your mop as part of
your regular maintenance.
fig. 17
CARE OF YOUR MICRO-FIBER
CLEANING PAD
1 We recommend washing your
micro-fiber cleaning pad separately
from other fabrics to avoid picking
up lint. Only use liquid detergent
(no powder detergent). Don't use
any fabric softeners or bleach. Line
dry or dry on a low dryer setting.
(fig. 17)
2 If there are loose threads on the
micro-fiber cleaning pad carefully
cut the thread with scissors. Don't
pull on them or cut at the base.
(fig. 18)
To order additional parts and
accessories, feel free to contact
us at www.SharkClean.com or
call 1-800-798-7398.
fig. 18
DECALCIFYING YOUR STEAM MOP
Over time calcium deposits can build
up and impact the performance
of your mop. We recommend you
decalcify your Steam Mop every 2-3
months to prolong the life of
your mop.
1 Fill the water tank of your steam
mop with 1 part white vinegar to 4
parts water.
2 Placing the mop in a shower or tub,
run the mop continuously until the
water tank is empty and the mop
stops making steam.
3 Turn the mop off and unplug your
Shark
Pro Steam Pocket
Mop.
®
®
www.sharkclean.com
English
11
Advertisement
