Advertisement
Using Your Steam Mop - cont'd
fig. 11
5 When one side of the micro-fiber
cleaning pad gets dirty, just flip the
mop head and you can quickly start
using the other side. (fig. 11)
6 When the water tank is empty, the
steam mop will stop producing
steam. You can refill the water tank
at any time as long as the mop is
unplugged from the outlet. Follow
the instructions from page 4. This
applies to switching the mop heads
or micro-fiber cleaning pad as well.
8
TOLL FREE: 1-800-798-7398
For your safety, the Steam
Mop will automatically go
into STANDBY mode after 30
seconds of non-use. Just press
the ON/STANDBY switch to
awaken your mop from auto
shut-off mode and resume
mopping.
NOTE: Please wait 2-3 minutes for
the Steam Mop to cool off before
removing the mop head or the
micro-fiber cleaning pad. Never leave
the steam mop with a damp/wet
micro-fiber cleaning pad on
any floor.
IMPORTANT: Your Steam Mop has
an auto shut-off feature that stops
the unit from steaming after 30
seconds of non-use. Just press the
ON/STANDBY switch to awaken your
mop from auto shut-off mode and
resume mopping.
Using Your Carpet Glider
fig. 12
THE CARPET GLIDER
1 The Carpet Glider can be used with
the all-purpose head to lightly steam
your carpet and area rugs. Just
place the mop head with micro-fiber
cleaning pad attached on top of the
glider and snap the top of it
into place. The recommended steam
setting is SCRUB when using the
carpet glider. (fig. 12)
2
Move the steam mop back and
forth across a section of the carpet.
The steam mop won't clean your
carpeting or areas rugs, but it's great
for grooming and freshening.
(fig. 13)
The Steam Mop is great for
grooming and freshening
though it won't clean your
carpet or area rugs.
fig. 13
NOTE: Do not leave steam mop
with carpet glider in one stationary
position for any period of time.
www.sharkclean.com
English
9
Advertisement
