Advertisement
Getting Started
When assembling your steam mop there
may be a little water in or around the
water tank. This is because we test all
our steam mops 100% before you buy
them, so you get a quality Shark
®
Pro
Steam Pocket
®
Mop.
a
c
e
f
d
a Steam Mop Body
b Mop Handle
c All-Purpose Mop Head (1) and
Triangle Mop Head (1)
d Filling Flask
e Two-Sided Micro-Fiber Cleaning Pads
for the All-Purpose Mop Head (2)
and Triangle Mop Head (1)
f (1) Large Screw*
g
Carpet Glider
*Phillips or flat head screwdriver can be
used. Screwdriver not included.
2
TOLL FREE: 1-800-798-7398
h
i
b
l
j
k
g
h Quick Release Swivel Cord Wrap
i Cord Clips
j Water Tank Cap
k Water Tank
l ON/Standby Switch
m Mop Head Release Button
m
IMPORTANT: First things first, always
make sure the mop is UNPLUGGED
from the wall when not in use.
Never fill the mop, attach the mop
head, change or remove the micro-
fiber cleaning pad when the mop is
plugged into the wall. To prolong
the life of your Shark
Pocket
®
Mop, we recommend using
distilled water. Make sure you only
add water to the tank. Chemicals or
cleaning solution may damage the
appliance and could be unsafe for
you and your family.
fig. 1
ASSEMBLE
1 Insert the Mop handle end labeled
"Front" into the steam mop body.
Make sure it is inserted past the line
printed on the pole. The screw hole
on the bottom of the pole will match
the screw hole on the mop body.
Secure the assembled handle and
®
Pro Steam
pole by using the provided large
screw and a Phillips or a flat head
screw driver. (fig. 1)
www.sharkclean.com
English
3
Advertisement
