Duct Design - Toshiba MMD-AP0056SPH1-E Installation Manual

6

Duct design

 Arrangement
Referring to the following dimensions, manufacture duct at the local site.
<Under air intake>
12.5
100 100 100
<Back air intake>
12.5
100 100 100
25-EN
805
12.5
100 100 100
100 100
825
805
12.5
100
100 100 100 100
825
– 13 –
Mount an air filter to the air intake side; otherwise decrease of capacity may be caused.
<Under air intake>
(Unit: mm)
Take out this cover plate.
<Back air intake>
Air filter Main unit
Push
Remove the filter from the
main unit while pushing
down on the tabs.
Remove the cover plate and then fix
it to the bottom surface.
26-EN