Epson TM-U925 User Manual page 53

illustration below.) Be especially careful when slip paper is
wide and has the glue on the right or left edge, since it may not
feed in a straight line.
OK to use
Paper feed direction
❏
Since the slip insertion detector uses a photo detector, paper
that has holes at the detector position, or is translucent, must
not be used. (See the illustration on the next page.)
Form stopper
position
Sub-slip feed
roller position
Do not use
Slip paper glued area
14.6mm
(.58")
Slip insertion sensor position
Use carefully Use carefully
Glued area
3mm (.12")
2mm (.08")
Slip insertion
sensor position
Reference Information 4-9