Epson TM-U925 User Manual page 27

2. Determine the point on the paper roll at which you want the
paper roll end detection to be triggered. Then measure the
distance A shown in the illustration.
Note:
There may be some difference between the measured distance A and
the actual sensing position.
3. Find the corresponding adjustment position number from the
table below.
Distance A
10 mm (0.39 inch)
8 mm (0.32 inch)
6 mm (0.24 inch)
4 mm (0.16 inch)
2 mm (0.08 inch)
distance A
Adjustment position number
#1
#2
#3
#4
#5
Setting Up the Printer 1-17