Note:
When using multi-ply paper that consists of an original and three
copies, be sure to print with a 9
characters on some of the copies may not be readable.
Notes on slip paper
❏
The slip paper must be flat, without curls or wrinkles,
especially at the top edges. Otherwise, the paper may rub
against the ribbon and become dirty.
❏
There must be no glue on the bottom edge of slip paper. It is
desirable for the glue to be on the top edge. Choose slip paper
carefully when the glue is on the right or left edge, since paper
feeding and insertion are affected by gluing conditions (e.g.,
glue quality, method, and length) and glue location. (See the
4-8 Reference Information
Total
0.30 mm {.0118"} or less
thickness:
(original to original + 3
copies)
0.36 mm {.014"} or less
(original + 4 copies)
Pressure
5 sheets maximum
sensitive
(original + 4 copies, at 20°
paper:
to 40°C {68° to 104°F}
Backing
0.06 to 0.15 mm {.0023 to
paper:
.0059"}
Copy and
0.06 to 0.075 mm {.0023 to
original:
.003"}
Total
0.24 mm {.0094"} or less
thickness:
(original to original + 3
copies)
0.30 mm {.0118"} or less
(original + 4 copies)
×
9 font. If a 7
×
9 font is used, some