Engineering Labels For Network Cables - Huawei AP4050DN-E Hardware Installation And Maintenance Manual

AP4050DN-E
Hardware Installation and Maintenance Guide
Content
Example of the Label
Figure 5-163
Figure 5-163 Sample label on an optical fiber between the device and the ODF
ODF
Meaning of the label in
l
l

5.4.3 Engineering Labels for Network Cables

Applicable Ranges
The labels can be applied to Ethernet cables.
Label Content
Table 5-29
You can also decide the label content based on the actual environment. If the device is not
installed in the cabinet, for example, you can remove the cabinet number.
Issue 05 (2018-02-02)
Meaning
C: column
number of the
terminal device
R: Optical
receiving
interface
T: optical
transmitting
interface
shows a sample label on an optical fiber.
G01 01 01 R
Figure 5-163
"ODF-G01-01-01-R" indicates that the local end of the optical fiber is connected to the
optical receiving terminal in row 01, column 01 of the ODF in row G, column 01 in the
machine room.
"A01-01-05-01-R" indicates that the opposite end of the optical fiber is connected to
optical receiving interface 1 in slot 05, chassis 01 in the cabinet in row A, column 01 in
the machine room.
shows the information on both sides of the labels affixed to Ethernet cables.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Example
-
5 Appendix
139