Table of Contents
Advertisement
[Clone to TV]
All settings are copied from USB drive to TV.
[Select Clone to TV]
Select the cloning data for cloning from multiple files.
[Clone to USB]
Clone the settings from the TV to the USB.
[Start Upgrade]
RF upgrade can be manually started by pressing "OK".
The TV set will auto switch OFF and will search for new
software and cloning data on RF network.
Note: RF cloning and software upgrade takes between
45-60 minutes depending on network topology and will
start after 5 min. being in Standby. As long as the Standby
LED is blinking, the TV is in upgrade mode.
44
Advertisement
Table of Contents
