Table of Contents
Advertisement
[Smart Power]
The power consumption for the Smart power mode is
defined by the Smart Picture setting in the TV Setup part.
[Off]: The TV will start with Standard Smart Picture
setting, but the setting can be changed in the guest setup
mode.
[On]: The TV will start with default Smart Picture setting
and Smart Picture setup and is not selectable in the guest
setup.
[Welcome message]
The settings from this submenu will allow you to
configure the welcome message, which is displayed at
every power ON.
[Display message]
[On]: To enable the welcome message.
[Off]: No welcome message
[Line 1]
Line 1: First line of the welcome message.
When pressing the "OK" button on the remote control
while editing line 1 or 2, a virtual keyboard will pop up on
the screen.
Note: Maximum 20 characters per line.
28
Advertisement
Table of Contents
