Epson Stylus Pro 4000 Limited Warranty page 8

Preferred
EPSON ®
SM
®
Limited Warranty Program for the EPSON Stylus Pro 4000
4) Make sure the print head is in the home (far right) position. Lock the print head by pushing
the green tab to the right.
5) Raise the ink levers. Turn off the printer and unplug the power cord.
Do not turn off the printer by unplugging it or turning off a power strip. You will not
CAUTION:
be able to lock the print head in the home position, and ink left inside the reservoir will leak
out, damaging the printer.
6) If you have installed any optional components (for example, the EpsonNet print server
card), remove them before shipping.
Components may be hot. After turning off and unplugging the printer, make sure
WARNING:
you allow each component to cool before handling it.
7) If you need to ship the printer, repack it using the original box and packing materials. If you
do not have the original box or packaging, contact Epson to arrange to obtain these.
8) If you are transporting the printer for carry-in service, leave the ink cartridges installed and
raise the ink levers. For carry-in service, you do not need to package the printer, but you must
transport it in a horizontal position on a flat, stable surface. If you are transporting the printer
in your own vehicle without the original packaging, make sure you wrap and pack the printer
securely.
What This Warranty Does Not Cover:
This warranty does not cover:
1) Any damage caused by using improper packaging materials or improper packaging and
shipping. Under the Whole Unit Exchange or Repair Programs you may be billed for these
damages.
2) Any damage caused by using unsuitable inks or ink delivery systems in the printer.
3) Any damage caused by use of non-Epson inks, ink cartridges, or media.