Borderless Printing - Epson Stylus Pro 11880 User Manual

Note: These settings
override settings made
through the control panel.
Printing with Epson Drivers for Macintosh
3. Select either of the following options:
• Print Page Line
your pages.
• Save Roll Paper
the last page of your document. Available only when you've selected
Roll Paper (Banner)

Borderless Printing

For true borderless printing on roll paper, you can select either
or
Expand Retain Size
page 76. Your image may be clipped on the left and right edges, but you can
minimize clipping by sizing your image according to the page width and by
adjusting the length.
For either setting, you should add 0.1 inch to the length of your custom size.
The Auto Expand setting provides the best solution for borderless printing
with minimal image clipping. Using this setting, you can create a custom
paper width equal to the width of the roll media. If you use the Retain Size
setting, your image width should be slightly wider than the custom page size.
The following table shows recommended image widths (in inches) for
borderless printing using either the Auto Expand (Standard) or Retain Size
setting:
Roll
paper Image width
width (with Auto Expand)
10 9.7075
13 12.8
16 15.8
17 16.8
24 23.8
36 35.8
44 43.8
50 49.8
54 53.8
3-85
prints trim lines on the right and bottom edges of
saves paper by not feeding the blank portion of
as the Paper Source.
and create a custom paper size, as described on
Image width
(with Retain Size)
10.34
13.34
16.34
17.34
24.34
36.34
44.34
50.34
54.34
| 85
Auto
Custom Paper Size
(for Retain Size only)
10.23
13.23
16.23
17.23
24.23
36.23
44.23
50.23
54.23