Table of Contents
Advertisement
8
COOKING
Preset Cooking Instructions
The oven is programmed with recipe settings at the time of manufacture and is ready to operate out of the
box. New menu settings can be loaded via USB (page 16) or programmed manually (page 11).
This oven uses impingement, convection, and microwave to cook food faster than traditional cooking
methods. As air enters the cavity, fan(s) are designed to move air through the jetplates to ensure uniformity
of cooking. While the jetplates are removable for cleaning, they are not removable for cooking. Without the
jetplate(s) in place, the oven will not deliver the proper cooking performance to either the top or bottom of
the food item. Additionally, a non-warranty service call may result.
The sequence of the steps below may vary, and some may not apply.
Step 1: Turning the Oven ON
•
Touch the power button on the module (or modules) that will be
used for cooking. The module will begin preheating.
•
When the module reaches the set temperature, recipes will be
selectable for cooking.
Step 2: Preheating
•
It should take approximately 10-15 minutes for the oven to preheat.
•
When the preheat temperature is reached, the module will start a
countdown from 5 minutes to allow the temperature to stabilize.
Once complete, the oven will display "Ready."
•
Cooking can begin on modules that are ready even if others are still
warming up.
Step 1
Step 2
Advertisement
Table of Contents
