TurboChef plexor Owner's Manual page 11

Installation Near Open Heat Source
When placing a TurboChef oven near an open heat
source (Figure 2), strictly adhere to the following:
- If the oven is being placed near a grill or stove,
a divider must exist between the oven and the
open heat source, with a minimum of 6" (153
mm) between the oven and the divider.
- If the oven is being placed near a fryer, a
divider must exist between the oven and fryer,
with a minimum of 12" (305 mm) between
the oven and the divider.
- The height of the divider must be greater than
or equal to the height of the oven, 61.16" (1553 mm).
- Verify the oven location has a minimum 5"
(127 mm) clearance on top and a minimum 2"
(51 mm) clearance on each side.
Partition
Height equal
to oven height
Grill
Figure 2: Installation Near Open Heat Source
TurboChef
PLEXOR Oven
6"
(153 mm)
Minimum
Partition
Height equal
to oven height
Deep Fryer
12"
(305 mm)
Maximum
3