Table of Contents
Advertisement
Activated charcoal filter
To maintain optimum air quality
inside the wine cellar, the activated
charcoal filter must be replaced at
least once a year.
To replace the activated charcoal filter:
1. Turn the filter cap 90° to the left or right.
2. Extract the cap from its seat.
3. Replace the activated charcoal filter
with a new one.
4. Replace the filter cap following the
indications in points 1 and 2.
Replacement filters can be
ordered from Authorised Service
Centres.
Use
Noises during operation
The wine cellar is cooled by means of a
compression system. In order to maintain
the preset temperature inside the wine
cellar, the compressor comes into operation
in response to the level of cooling required,
and may operate continuously if necessary.
When the compressor starts to function, it
creates a buzzing noise which generally
diminishes in intensity after a few minutes.
Another normal wine cellar operating noise
is a gurgling due to the refrigerant flowing
through the pipes in the circuit. This noise is
normal and does not indicate an appliance
malfunction.
Turning the appliance off
Whenever the appliance is to remain
unused for long periods, it should be
switched off.
1. Press and hold the ON/OFF
button on the control panel for a few
seconds until the appliance turns off.
2. Unplug the appliance from the wall
socket.
3. Empty the wine cellar.
4. Dry any residual moisture which has
accumulated with a soft cloth.
5. Leave the door ajar to prevent the
humidity and trapped air from creating
unpleasant smells.
17
Advertisement
Table of Contents
