Install Software - Epson Stylus Photo 1400 Start Here Manual

5

Install Software

Your software works with Windows
and Windows Vista,
Windows
1
Make sure the printer is
NOT CONNECTED to your computer.
Note: If you see a screen like this,
click Cancel and disconnect the
USB cable. You can't install your
software that way.
2
Insert the printer Software CD.
With Windows 2000 or XP, go to step 4.
With Windows Vista, go to step 3.
3
With Windows Vista, when you see this
screen, click Run Epsetup.exe.
Then click Continue at the User Account
Control screen.
4
Click Install and follow
the on-screen instructions.
Software installation takes
several minutes.
5
When you see this screen, click the
first option and then click Next.
If you will connect your printer to
your computer through an external
print server, click the second
option, click Next, and skip
to step 8.
6
When prompted, connect the USB cable. Use any open USB port on
your computer. Make sure the printer is turned on.
Note: If installation doesn't continue after a moment, make sure you
securely connected and turned on the printer.
7
Follow the on-screen instructions to print a test page and install the
rest of the software.
8
When you're done, remove the CD.
You're ready to print! See your User's Guide or your on-screen Reference
Guide.
and Macintosh
™
1
®
2000, XP, XP Professional x64 Edition,
®
OS X 10.2.8, and 10.3.9 to 10.4.x.
2