Transporting The Printer; Related Documentation - Epson Stylus Color 860 Product Information

Transporting the Printer

If you move your printer some distance, you need to prepare it
for transportation in its original box. Follow these steps:
To avoid damage, always leave the ink cartridges
installed when transporting the printer.
Be sure to remove the tape used in step 4 after installing
the printer in its new location.
1. Turn on the printer, wait until the print head locks in the
far right position, then turn off the printer.
2. Unplug the power cord from the electrical outlet. Then
disconnect the printer cable from the printer.
3. Remove any paper from the printer and remove the paper
support.
4. Open the printer cover. Secure the ink cartridge holder to
the printer with tape as shown, then close the printer cover.
Tape the ink cartridge holder
to the printer case
5. Push in the output tray extensions and close the tray.
6. Repack the printer and attachments in the original box
using the protective materials that came with it. See the
unpacking sheet that was packed with your printer.
Be sure to keep the printer level as you transport it.
After transporting the printer, remove the tape securing the
print head and test your printer. If you notice a decline in
print quality, clean the print head (see page 9); if output is
misaligned, align the print head (see page 10).

Related Documentation

TM-SC860/1160 EPSON Stylus COLOR 860/
EPSON Stylus COLOR 1160 Service
Manual
PL-SC860 EPSON Stylus COLOR 860 Parts Price
List
CPD 8991 EPSON Stylus COLOR 760/
EPSON Stylus COLOR 860
Printer Basics
CPD 8992 EPSON Stylus COLOR 760/
EPSON Stylus COLOR 860
Start Here
CPD 9224 EPSON Stylus COLOR 760/
EPSON Stylus COLOR 860
Unpacking the Printer
8/99
EPSON Stylus COLOR 860
EPSON Stylus COLOR 860
- 11