Advertisement
When Driving
Smart Brake Support [Rear Crossing] (SBS-RC)
• If cracks or damage caused by flying gravel or debris is visible around a
rear radar and rear camera, stop using the SBS-RC system immediately
and have your vehicle inspected by an expert repairer, we recommend an
Authorised Mazda Repairer. If the vehicle continues to be driven with
cracks or scratch marks left around an ultrasonic sensor, the system may
operate unnecessarily and cause an unexpected accident.
• Consult an expert repairer, we recommend an Authorised Mazda
Repairer for rear bumper replacement.
Do not modify the suspension:
If the vehicle height or inclination is changed, the SBS-RC system may not
operate correctly because it cannot detect obstructions correctly.
Do not apply a strong force to a rear radar and rear camera:
When washing the vehicle, do not spray highly pressurised water against a
rear radar and rear camera, or rub it strongly. In addition, do not hit the rear
bumper forcefully when loading and unloading cargo Otherwise, the sensors
may not detect obstructions correctly which could cause the SBS-RC system
to not operate normally, or it could operate unnecessarily.
Collision Warning
If there is a possibility of a collision, the collision warning
sound is activated continuously and a warning is displayed
on the active driving display and the multi-information
display.
Multi-information display
42
For details, refer to Section 4, "i-ACTIVSENSE".
WARNING
Active driving display
Message is displayed.
Advertisement
