Advertisement
When Driving
Setting the Mazda Radar Cruise Control with Stop & Go function
(MRCC with Stop & Go function)
How to Set the Speed
Adjust the vehicle speed to the desired setting using the accelerator pedal and
press the RES switch up (SET+) or down (SET-) to start headway control.
The set speed is indicated on the display. At the same time, the MRCC standby
indication (white) changes to the MRCC set indication (green).
Travel status
During travel at
constant speed
During travel under
headway control
Setting the Mazda Radar Cruise Control with Stop & Go function
(MRCC with Stop & Go function)
Turning off the system
When the MRCC switch is pressed while the MRCC is operating, the MRCC
turns off.
Close Proximity Warning
If your vehicle rapidly closes in on the vehicle ahead
because the vehicle ahead applies the brakes suddenly
while you are travelling in headway control, the warning
sound activates and the brake warning is indicated in the
display.
Always verify the safety of the surrounding area and
depress the brake pedal while keeping a safe distance
from the vehicle ahead. Additionally, keep a safe
distance from the vehicles behind you.
30
For details, refer to Section 4, "i-ACTIVSENSE".
Indication on multi-information
display
Indication on active driving display
Message is displayed.
Advertisement
