Advertisement
When Driving
Cruising & Traffic Support (CTS)
Setting method
1. Press the CTS switch.
The CTS main indication (white) turns on. In addition, the
CTS display indication is displayed on the
multi-information display at the same time.
2. Adjust the vehicle speed to the desired setting using the
accelerator pedal and press the RES switch up (SET+) or
down (SET-) to start headway control.
The set speed is indicated on the display. At the same time,
the CTS main indication (white) changes to the CTS set
indication (green).
3. The headway control is operable when all of the conditions for it to operate are
met, or the steering assist function is operable when all of the conditions for it to
operate are met.
Turning off
When the CTS switch is pressed while the CTS is operating, the CTS turns off.
Close Proximity Warning
If your vehicle rapidly closes in on the vehicle ahead while
you are travelling under headway control, the warning sound
is activated and the brake warning is indicated on the display.
Keep a safe distance between your vehicle and a vehicle
ahead.
36
For details, refer to Section 4, "i-ACTIVSENSE".
CANCEL switch
RES switch
CTS switch
Message is displayed.
Advertisement
