Table of Contents
Related Manuals for Neilsen CT3191
Summary of Contents for Neilsen CT3191
- Page 1 PALM SANDER CT3191 ORIGINAL INSTRUCTIONS SAVE THESE INSTRUCTIONS AND PRECAUTIONS. READ ALL PRECAUTONS AND INSTRUCTIONS BEFORE USE. Cannon Tools Limited Address: 20 Station Road, Rowley Regis, West Midlands, B65 0JU.UNITED KINGDOM...
-
Page 2: Ec Declaration Of Conformity
In case of alteration of the machine, not agreed upon by us, this declaration will lose its validity. Product description: PLAM SANDER Model: CT3191 Applicable EC Directives: EC Machinery Directive 2006/42/EC EC Directive of Electromagnetic Compatibility 2014/30/EU Harmonized standards：... -
Page 3: Description And Specification
1. DESCRIPTION AND SPECIFICATION Trigger switch Dust box STANDARD ACCESSORIES: 1. Sand paper 1pc 2. Dust box 3. Carbon brush 1set Please inspect the product to ensure there is no damage and all parts have been included prior to use. 2. -
Page 4: General Power Tool Safety Warnings
3. SYMBOLS The following symbols are used in this manual and/or on the machine: Denotes risk of Read manual before personal injury or damage to the tool In accordance with Class II- The essential safety machine is double standards of insulated;... - Page 5 Always check that the power supply corresponds to the voltage on the rating plate. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use adapter plugs with earthed power tools. Unmodified plugs and matching outlets will reduce the risk of a lethal electric shock.
- Page 6 plugging in power tools when the switch is in the on position makes accidents more likely. Remove any adjusting keys or spanners before turning on the power tool. A spanner or key left attached to a rotating part of the power tool may result in personal injury.
-
Page 7: Functional Description
with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work which needs to be done. Using a power tool in ways for which it was not intended can lead to potentially hazardous situations. - Page 8 Switch action CAUTION: Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the “OFF” position when released. Switch can be locked in “ON” position for ease of operator comfort during extended use. Apply caution when locking tool in “ON”position and maintain firm grasp on tool.
-
Page 9: Cleaning And Maintenance
Dust box The use of the dust box makes sanding operations clean and dust collection easy. To attach the dust box, fit the box’s entry port onto the dust spout on the tool. Make sure that the hole in the box’s entry port is just over the pimple-like protrusion on the dust spout. - Page 10 Lubrication The machine requires no additional lubrication. Faults Should a fault occur, e.g. after wear of a part, In the back of this manual you find an expanded view of the parts that can be ordered. ENVIRONMENT Should your appliance need replacement after extended use, do not discard it with the household rubbish but dispose of it in an environmentally safe way.
-
Page 11: Parts Diagram
9. PARTS DIAGRAM... -
Page 12: Parts List
10. PARTS LIST NO. Description Description Power plug and cord 1mm Shim Screw Cover Mantle Top housing Screw Screw Bearing Cord protector Bracket Cord clamp Washer Screw Spring mattress Switch pole Screw Screw Screw Left housing Press plate Left fastener Steel clamp Stator Base... - Page 13 CANNON TOOLS LTD Add: 20 station road, Rowley Regis, west midlands,B65 0JU.U.K. Made in China...