Table of Contents
Related Manuals for Neilsen CT3809
Summary of Contents for Neilsen CT3809
- Page 1 ORBITAL SANDER 125MM CT3809 ORIGINAL INSTRUCTIONS SAVE THESE INSTRUCTIONS AND PRECAUTIONS. READ ALL PRECAUTONS AND INSTRUCTIONS BEFORE USE. Cannon Tools Limited Address: 20 Station Road, Rowley Regis, West Midlands, B65 0JU.UNITED KINGDOM...
-
Page 2: Ec Declaration Of Conformity
In case of alteration of the machine, not agreed upon by us, this declaration will lose its validity. Product description: ORBITAL SANDER 125MM Model: CT3809 Applicable EC Directives: EC Machinery Directive 2006/42/EC EC Directive of Electromagnetic Compatibility 2014/30/EU Harmonized standards：... -
Page 3: Description (Fig. 1)
1. DESCRIPTION (Fig. 1) 1. ON/OFF switch 2. Speed selector 3. Sanding base plate 4. Dust collection box Please inspect the product to ensure there is no damage and all parts have been included prior to use. 2. TECHNICAL DATA Voltage / frequency 230-240V~50Hz Power input... -
Page 4: General Power Tool Safety Warnings
WARNING! For your own safety, read this manual and the general safety instructions carefully before using the appliance. Your power tool should only be given to other users together with these instructions. 3. SYMBOLS The following symbols are used in this manual and/or on the machine: Denotes risk of Read manual before personal injury or... - Page 5 example, in the presence of inflammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes Keep children and bystanders at a distance when operating a power tool. Distractions can cause you to lose control of it. 4.2 Electrical safety Always check that the power supply corresponds to the voltage on the rating plate.
- Page 6 equipment such as a dust mask, non-skid safety shoes, a hard hat, or hearing protection whenever it is needed will reduce the risk of personal injury. Avoid accidental starts. Ensure the switch is in the off position before inserting the plug. Carrying power tools with your finger on the switch or plugging in power tools when the switch is in the on position makes accidents more likely.
- Page 7 power tool. If it is damaged, the power tool must be repaired. Many accidents are caused by using poorly maintained power tools. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to jam and are easier to control. Use the power tool, accessories and cutting tools, etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work...
-
Page 8: Assembly And Operation
damage or may cause an electric shock. 6. ASSEMBLY AND OPERATION Fitting the sandpaper: Your sander uses pre-cut and pre-punched hook & loop backed sheets. Align the holes in the paper with the holes in the Backing Pad and press the paper firmly into place. -
Page 9: Cleaning And Maintenance
Applying increased pressure to the Sander does not lead to an increase in the sanding rate,but instead increases the wear on the sand paper. Only use the original accessories included in this Sander. Rough Sanding: Attach coarse grade sand paper. Apply only light pressure to the Sander so that it runs at a higher sanding rate, achieving a high rate of removal. - Page 10 ENVIRONMENT Should your appliance need replacement after extended use, do not discard it with the household rubbish but dispose of it in an environmentally safe way. Waste produced by electrical machine items should not be handled like normal household rubbish. Please recycle where recycle facilities exist.
- Page 11 Expanded View...
- Page 12 Spare parts list...
- Page 13 CANNON TOOLS LTD Add: 20 station road, Rowley Regis, west midlands,B65 0JU.U.K. Made in China...