Table of Contents
Related Manuals for Neilsen CT1075
Summary of Contents for Neilsen CT1075
- Page 1 10MM AIR BELT SANDER CT1075 ORIGINAL INSTRUCTIONS Cannon Tools Limited Address: 20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K. SAVE THESE INSTRUCTIONS AND PRECAUTIONS. READ ALL PRECAUTONS AND INSTRUCTIONS BEFORE USE.
-
Page 2: Ec Declaration Of Conformity
In case of alteration of the machine, not agreed upon by us, this declaration will lose its validity. Product description: 10MM AIR BELT SANDER Model: CT1075 Applicable EC Directives: EC Machinery Directive 2006/42/EC 20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K. -
Page 3: Safety Warnings Symbols
SAFETY WARNINGS SYMBOLS In this manual and/or on the machine the following symbols are used: Denotes risk of personal injury, loss of life or damage to the tool in case of non-observance of the instructions in this manual. Wear hearing protection. Wear safety goggles. - Page 4 Keep children and unauthorised persons away from the work area. Check moving parts alignment on a regular basis. Ensure workpiece is secure before operating the sander. Never hold a workpiece by hand. Check the workpiece to ensure there are no protruding screws, bolts, nuts, nails, rivets, etc. ...
-
Page 5: Specification
SPECIFICATION Belt size: 10 x 330mm Operating air pressure: 90 Psi (6.3 Bar) Average air consumption: 6 cfm Free speed: 16000 rpm Hose Size: 3/ 8" Air inlet: 1/ 4" BSP PREPARING FOR USE Air Supply (Recommended hook-up procedure is shown in fig.1). 1. -
Page 6: Maintenance
2. Loosening clamp bolt (fig.3.1. on the top of sander) allows the angle between the grip and the belt to be altered to suit the job in hand. After adjustment retighten the clamp bolt. 3. Once connected to the air supply the sander is started by squeezing the trigger (2). 4. -
Page 7: Assembly Diagram And Parts List
ASSEMBLY DIAGRAM AND PARTS LIST... - Page 8 CANNON TOOLS LTD Add: 20 station road, Rowley Regis, west midlands,B65 0JU.U.K. Made in China...