Table of Contents
Advertisement
Installing the Software for Windows 95
Follow these steps to install the printer driver using the
Windows 95 plug-and-play capabilities:
1. Make sure the printer is connected to the computer's parallel
port.
2. Turn off the printer and your computer, if they are on.
3. Turn on the printer first; then turn on the computer. Your
computer begins loading Windows 95.
4. If you defined a password, enter it at the prompt. You see
the New Hardware Found screen.
Note:
If you do not see the New Hardware found screen, follow the
procedure under "Installing the driver while running
Windows 95" on page 2-7 instead.
5. Your printer model name is displayed on the screen.
Click the Driver from disk provided by hardware
manufacturer button (if not already selected). Do not
select any of the other buttons.
6. Click OK. You see the Install From Disk screen.
7. Insert the Windows Setup Disk 1 in a diskette drive.
8. If you inserted the diskette in drive A, click OK. Otherwise,
change the drive letter in the Copy manufacturer's files
from box and click OK.
Installing and Using the Windows Printer Software
2-5
Advertisement
Table of Contents
