Initial Configuration - ZyXEL Communications Prestige 2602HL Series Quick Start Manual

The PWR/SYS LED blinks during system testing and turns steady green if the testing is successful.
The LAN turns on if the LAN port is properly connected and blinks while sending or receiving data.
The DSL LED blinks during DSL line initialization and turns steady green when the Prestige has a DSL
connection.
The INTERNET LED turns steady green if the Prestige can access the Internet. It blinks when the Prestige is
sending or receiving data.
A PHONE LED turns steady green if a SIP account is registered for the corresponding PHONE port and blinks
when a call comes in or one of the connected phones is off hook.
• If a PHONE LED is on, skip to
• If the INTERNET LED is on but the PHONE LEDs are off, go to
Then go to Section 2.3
• If the INTERNET LED is off but the DSL LED is on, go to
• If the DSL LED is off, there is a problem with the hardware or the phone line connection to the ISP.

2 Initial Configuration

You may configure the Prestige for Internet access in any one of these ways:
• Zero Configuration
• Web Configurator Internet Access Wizard
Prestige 2602H/HL Series Quick Start Guide
Section 2.6 to see how to make calls through the Internet.
and configure the Voice Configuration wizard screen.
Section 2.2
Section 2 to configure your Internet access settings.
4
and access the web configurator.