Epson Stylus Color 200 Manual page 3

Ink Cartridges
Black ink cartridge (S020047):
Color Black
Print 540 pages (A4 paper; text)
capacity*
Cartridge life 2 years from production date and up to
6 months after opening the package
at 77°F (25°C).
Temperature Storage:
Transit:
Freezing:**
Dimensions 1.3 inches (W) 2.3 inches (D) 1.7 inches (H)
33 mm (W)
Color ink cartridge (S020097):
Colors Cyan, magenta, and yellow
Print 320 pages (A4 paper; 360 dpi; 5% each color)
capacity*
Cartridge 2 years from production date and up to
life 6 months after opening the package at
77°F (25°C).
Temperature Storage:
Transit:
Freezing:**
Dimensions 1.8 inches (W) 2.2 inches (D) 1.7 inches (H)
45.9 mm (W)
* The print capacity may vary depending on how often you use the print
head cleaning function. Also, if you print large graphics and dense text
with little white space, you use ink faster.
** The ink thaws and is usable after approximately 3 hours at 77°F (25°C).
c
Caution:


Use only genuine EPSON cartridges and do not refill them.
Other products may cause damage not covered by EPSON's
warranty.


Do not use an ink cartridge after the expiration date on the
package.
Electrical
Input voltage range: 103.5 to 132 V
Rated frequency range: 50 to 60 Hz
Input frequency range: 49.5 to 60.5 Hz
Rated current: 0.5A
Power consumption: Approx. 15 W (ISO 10561 letter
pattern)
Ink Jet Printers
–22 to 104°F (–30 to 40°C)
1 month at 104°F (40°C)
–22 to 140°F (–30 to 60°C)
1 month at 104°F (40°C)
120 hours at 140°F (60°C)
26.6°F (–3°C)
58 mm (D) 43.2 mm (H)
–22 to 104° F ( 30 to 40°C)
1 month at 104°F (40°C)
–22 to 140°F ( 30 to 60°C)
1 month at 104°F (40°C)
120 hours at 140°F (60°C)
21.2°F ( 6°C)
56.5 mm (D) 43.2 mm (H)
Mechanical
Paper feed method: Friction with auto/manual sheet feeder,
Total print volume: 25,000 pages
Dimensions:
Weight:
Environmental
Temperature: Operation
Storage*
Humidity: Operation
Storage*
* Stored in shipping container
Safety Approvals
Safety standards: UL 1950 with D3, CSA 22.2 950 with D3
R.F.I.: FCC part 15 subpart B class B CSA C108.8
Fonts
The printer comes with an installed set of fonts selectable using
Default setting mode. However, the printer always uses the
fonts you select with your software program. You need to select
the printer's installed fonts only when your software program
does not allow you to select fonts. You can select other font and
pitch combinations using ESC/P 2 commands.
Scalable
fonts
EPSON Roman
EPSON Sans Serif
EPSON Roman T
EPSON Sans Serif H
6/96
EPSON Stylus COLOR 200
top entry
Without paper support
Width: 15.6 inches (396.7 mm)
Depth: 8.1 inches (205.6 mm)
Height: 5.7 inches (144.0 mm)
With paper support
Width: 15.6 inches (396.7 mm)
Depth: 8.1 inches (205.6 mm)
Height: 10.5 inches (267.3 mm)
8.6 lb (3.9 kg) without the ink cartridge
and print head unit
50 to 95°F (10 to 35°C)
–4 to 140°F ( 20 to 60°C)
1 month at 104°F (40°C)
120 hours at 140°F (60°C)
20 to 80% RH
5 to 85% RH (without
condensation)
Minimum Maximum
point size point size
8 32
8 32
8 32
8 32
EPSON Stylus COLOR 200-3
Increments
2
2
2
2