Epson Stylus Color 200 Manual page 2

EPSON Stylus COLOR 200
Paper
Note:
Since the quality of any particular brand or type of paper may be
changed by the manufacturer at any time, EPSON cannot guarantee
the use of any particular brand or type of paper. Always test samples
of paper stock before purchasing large quantities or printing large jobs.
Paper path: Sheet feeder, top entry
Paper 100 sheets of plain paper at 17 lb
capacity: (64 g/m
70 sheets of EPSON special coated paper
30 sheets of EPSON high-quality glossy paper*
50 transparency films*
10 envelopes
Paper size: Letter (8.5
A4 (210 297 mm)
B5 (176 250 mm)
Legal (8.5
Statement (8.5
Executive (7.5
Paper types: Plain paper and special papers distributed by
EPSON (high-quality glossy paper, special
coated paper, and transparencies)
Paper 0.003 to 0.004 inch (0.08 to 0.11 mm)
thickness:
Paper
17 to 24 lb (64 to 90 g/m
weight:
Use 24 lb (90 g/m
temperature and humidity conditions.
* With one sheet of plain paper beneath the stack and printed one page
at a time
Envelopes:
Size No. 10
DL
Paper types Plain, bond, or airmail paper
Paper thickness 0.006 to 0.02 inch (0.16 mm to 0.52 mm)
Paper weight
12 to 24 lb (45 to 90 g/m
Transparencies:
Size A4
Letter
Thickness 0.003 to 0.0033 inch (0.075 to 0.085 mm)
EPSON Stylus COLOR 200-2
2 )
11 inches)
14 inches)
5.5 inches)
10 inches)
2 );
2 ) paper under normal
9.5 4.1 inches (240
8.7 4.3 inches (220
2
)
(210 297 mm)
(8.5 11 inches)
Note:


Poor quality paper may reduce print quality and cause paper jams
and other problems. If you encounter problems, switch to a higher
grade of paper.


Print on special coated paper, high-quality glossy paper, envelopes,
and transparencies only under these normal conditions:
Temperature 59 to 77°F (15 to 25°C)
Humidity
(High-quality glossy paper can be stored at 20 to 60% relative
humidity.)


Do not load curled or folded paper, envelopes, or transparencies.


The following EPSON genuine papers are available:
Special coated paper for 360 dpi printing (Letter) S041060
Special coated paper for 720 dpi printing (Letter) S041062
Special coated paper for 720 dpi printing (Legal) S041048
High-quality glossy paper (Letter)
Transparency film (Letter)
Iron-on transfer media (Letter)
Printable area:
Single sheets
A
BL
Envelopes
104 mm)
110 mm)
A
BL
A The minimum top margin is 0.12 inch (3.0 mm).
Note: When printing multiple sheets of glossy paper, the minimum top
BL The minimum left margin is 0.12 inch (3.0 mm).
BR The minimum right margin is:
0.12 inch (3.0 mm) for Statement and Executive paper
0.38 inch (9.7 mm) for Letter and Legal paper, and transparencies
0.15 inch (3.8 mm) for A4 paper
0.54 inch (13.8 mm) for DL envelopes
1.38 inches (35.1 mm) for #10 envelopes
C The minimum bottom margin is 0.54 inch (14.0 mm).
Note:
Always load paper into the sheet feeder short edge first except
envelopes. Load envelopes long edge first.
6/96
40 to 60% RH
margin is 1.2 inches (30mm)
S041072
S041064
SE41001
BR
C
BR
C
Ink Jet Printers