Understanding Alerts; List Of Alerts - Carrier Comfort Series Owner's Manual

UNDERSTANDING ALERTS

From time to time your Carrier system will display an alert — a reminder
to change the furnace filter, or perform regular maintenance, for example.
If you have connected your Comfort Series Wi- -Fi Thermostat to the
Internet, these alerts can also be sent to you via email.
When an alert displays, you can dismiss it or ask to be reminded later.
For example, if you receive a furnace filter alert and choose Remind me
later, the alert will clear and display again 24 hours later. If you choose
OK when the alert displays, it will reset the reminder.

List of Alerts

Your Comfort Series Wi- -Fi Thermostat can generate the following alert
messages (some alerts may not apply depending on your system.)
Furnace Air Filter
UV Lamp
Low Temp Alert
High Temp Alert
Heat Not Responding
Cool Not Responding
Maintenance Reminder
Auxiliary Heat Run Time
Auxiliary Outdoor
Temperature
Furnace filter needs to be cleaned or
changed.
UV lamp needs to be changed.
Temperature in the home is too low.
Temperature in the home is too high.
The system has failed to heat the home.
The system has failed to cool the
home.
HVAC system due for regular mainte-
nance.
Auxiliary heat source is running too
often.
Your Comfort Series Wi- - Fi Thermostat
auxiliary heat has been called to run
when the outdoor temperature exceeds
the programmed set point.
32