Using Your Comfort Series Wi- - Fi Thermostat; System Mode - Carrier Comfort Series Owner's Manual

USING YOUR COMFORT SERIES Wi- - Fi
THERMOSTAT
The bright, easy- -to- -read screen on your Comfort Series Wi- -Fi
Thermostat makes it simple to review and adjust the settings any time
you want.
Adjusting the Temperature
You can easily adjust the temperature without changing the Comfort
Series Wi- -Fi Thermostat's schedule by pressing the arrow keys when the
Home screen is displayed.
Press Y to increase the temperature set point by 1° F (0.5° C).
d
Press B to decrease the temperature set point by 1° F (0.5° C).
d
If the Comfort Series Wi- -Fi Thermostat is set to Auto mode,
d
press A to select the Cool setting.
If the Comfort Series Wi- -Fi Thermostat is set to Auto mode,
d
press " to select the Heat setting.
Once you've adjusted the temperature, the screen indicates that you are
currently holding the set temperature rather than running a program.
The Comfort Series Wi- -Fi Thermostat will hold the new temperature for
the duration you specified in the Hold Action option during the initial
setup (see Hold Action on Pg. 20) or until you press OK.
If you are using Auto mode, note that there is a minimum difference
allowed between heat and cool set temperatures. The system will prevent
you from setting the temperature within these limits. See the Comfort
Series Wi- -Fi Thermostat Installation Manual for information about
configuring the minimum temperature difference settings.

System Mode

To change system mode:
From the Home screen, press MENU.
Select System Mode.
Select your temperature mode: Heat, Cool, Auto or Off.
13