Table of Contents
Advertisement
Do not clean in the dishwasher. Remove the steel grids and clean them with a sponge and some hot water
Burners and steel
and washing-up liquid.
grid of the gas burn-
Remove the burner cup and cover. Clean with a sponge and some hot water and washing-up liquid. Ensure
ers
that the gas openings in the burner cup are clean and free of any particles of dirt.
Clean the igniters with a small, soft brush. The gas burners only work properly when the igniters are clean.
Remove food residue from the burner shells with a damp cloth and warm soapy water. Only use a little
water. Water must not be allowed to enter the appliance. Ensure that the nozzle openings do not become
blocked or damaged during cleaning.
Dry all parts after cleaning and place the burner cover accurately on the burner cup. Individual parts which
are not seated correctly can prevent the burner from igniting.
The burner cap is coated in black enamel. Due to the high temperatures, discolouration may occur. This
does not impair the operation of the burners.
Put the steel grid back in place.
Clean with some washing-up liquid and a damp cloth. Dry with a soft cloth.
Knobs
Can be cleaned with glass cleaner. Do not use any harsh cleaning agents or sharp metal objects. These
Door glass
could scratch and damage the surface of the glass panel.
Clean with some washing-up liquid and a damp cloth. Dry with a soft cloth.
Seal
Clean with hot water or vinegar solution.
Oven floor, ceiling
For heavy soiling: only use oven cleaner in a cold oven. Never apply to the back panel.
and side panels
Clean with some washing-up liquid and a damp cloth. Dry with a soft cloth.
Glass cover on the
oven light
Soak in hot soapy water. Clean with a brush or a sponge.
Accessories
Do not clean in the dishwasher. Never use oven cleaner. To avoid scratches, never touch the metal sur-
Aluminium baking
faces with a knife or similarly sharp object. Wipe the surfaces horizontally and without applying pressure
tray (option)
with soapy water and a soft window cloth or a lint-free microfibre cloth. Dry with a soft cloth. Do not use any
abrasive materials, scouring sponges or rough cleaning cloths. They could scratch the baking tray
If a childproof lock has been fitted on the oven door, it must be removed before cleaning. Soak all plastic
Childproof lock
parts in hot soapy water and wash with a sponge. Dry with a soft cloth. If very dirty, the childproof lock will
(option)
not work properly.
Clean with some washing-up liquid and a damp cloth. Dry with a soft cloth.
Plinth drawer
(option)
Soak in hot soapy water. Clean with a brush or sponge.
Accessories
Cleaning the self-cleaning surfaces in the cooking
compartment
The back wall in the cooking compartment is coated with a
highly porous ceramic layer. This coating absorbs and
disintegrates splashes from baking and roasting while the oven
is in operation. The higher the temperature and the longer the
oven is in operation, the better the result will be.
If splashes are still visible even after repeated use, proceed as
follows:
Clean the floor, ceiling and side panels of the cooking
1.
compartment thoroughly.
Set
:
3D hot air.
2.
With the door closed, heat up the empty oven for
3.
approximately 2 hours at maximum temperature.
The ceramic coating is regenerated. When the cooking
compartment has cooled down, remove the brown or white
residue with water and a soft sponge.
Light discolouration of the coating does not affect automatic
self-cleaning.
Caution!
Never use abrasive cleaning agents. You will scratch or
■
destroy the highly porous coating.
Never treat the ceramic coating with oven cleaner. If oven
■
cleaner accidentally gets onto it, remove it immediately with a
sponge and plenty of water.
Cleaning the cooking compartment floor, ceiling and side
walls
Use a dish cloth and hot soapy water or a vinegar solution.
If there are heavy deposits of dirt, use a stainless steel scouring
pad or oven cleaner. Only use when the cooking compartment
is cold. Never treat the self-cleaning surfaces with a scouring
pad or oven cleaner.
18
Detaching and refitting the rails
The rails can be removed for cleaning. The oven must have
cooled down.
Detaching the rails
Lift up the front of the rail
1.
and unhook it (figure A).
2.
Then pull the whole rail forward
3.
and remove it (Fig. B).
4.
$
Clean the rails with cleaning agent and a sponge. For stubborn
deposits of dirt, use a brush.
%
Advertisement
Table of Contents
