The Cut Sheet Feeder; The Pull Tractor - Epson LQ-1050+ Paper Manual

Epson lq-1050+: product information

Hide thumbs Also See for LQ-1050+:

Product information manual (9 pages)

Table Of Contents

Table of Contents

Lights

MULTI-PART (orange)

On when the paper thickness

lever is set to position 4 or

higher. (For regular paper, this

light should not be on.) When

this light is blinking, the micro-

adjustment function can be

used.

POWER (green)

On when the POWER switch is

on and power is supplied.

READY (green)

On when the printer is ready to

accept input data. Flickers

during printing.

PAPER OUT (red)

On when the printer is out of

paper or when continuous

paper is in the standby position.

ON LINE (green)

On when the printer is on line

and ready to accept data.

SelecType

FONT

Press this button to select LQ

ROMAN, LQ SANS SERIF, DRAFT

mode, or a cartridge font (if

installed). The orange indicator

light shows the font you select.

See selecting Typestyles later in

this chapter.

PITCH

Press this button to select the

character spacing. You can choose

10 CPL, 12 CPL, 15 CPL, or PS

(proportional spacing). The

orange indicator light shows the

spacing you select. You cannot

select proportional spacing with

draft mode. (Draft mode

overrides proportional spacing.)

CONDENSED

Press this button to turn the

condensed mode on and off. The

orange indicator light is on when

the printer is in the condensed

mode. In the condensed mode, all

characters are printed at

approximately 60 percent of their

normal width You cannot select

condensed mode with a pitch of

15 cpi.

24-Pin

Printers

Graphics

Single-density

Double-density

High-speed double-density

Quadruple-density*

Single-density

Double-density

CRT Ill

Triple-density

Hex-density*

Adjacent dots cannot be printed in this mode.