Service Department; Product Support - Epson GQ-3500 Product Support Bulletin

E P S O N
EPSON AMERICA INC.

SERVICE DEPARTMENT

PRODUCT
DATE: 7/21/87
SUBJECT:
When printing
upgrade, (M0231), in the LQ-1500 emulation, it is necessary to
disable dip switch 1-6 on the interface board.
characters when the print position moves beyond the right margin.
The Interface comes from the factory with this switch enabled.
Shown below is a print out from P.C. Paint ver. 2.0 with dip
switch 1-6 enabled and disabled using the LQ-1500 emulation.
Figure 3 is a table of dip switch 1 settings.
Figure (1)
(1-6 enabled)
SUPPORT
GQ-3500 VERSION M0231 FIRMWARE GRAPHICS
graphics on the GQ-3500 with the new firmware
BULLETIN
This will discard
Figure (2)
(1-6 disabled)
P-0009