Epson GQ-3500 Product Support Bulletin page 9

EPSON
EPSON AMERICA,
PRODUCT SUPPORT BULLETIN
SERVICE
INC.
DATE:
9/22/87
SUBJECT:
NUMBER:
P-0011
This APPLICATION NOTE is
users utilizing the GQ-3500. The PRINTER FUNCTION TABLE contained
herein will assist the user in creating a custom printer driver
for the GQ-3500.
supported,
work.
The GQ-3500 should be equipped with a
m0231 or later (verify this by running a text self-test shown on
page 1-15 of the GQ-3500 users manual). The version number is
located at the lower right hand corner of the test printout.
These are some of the features supported by the created PFT.
The PFT installation is divided into 4 sections:
I . Install DW4
manual).
II.
Revise GQ-3500
within).
III. Designate
DEFINED profile (Refer to DW4 users manual).
IV.
Set GQ-3500 dip switches for page printer mode.
The installation procedure must be completed
to support
should take approximately 30-40 minuets to
(GQ-3500) must be connected and ready to print to complete the
creation and installation of the PFT.
EPSON AMERICA SERVICE, 23610 TEL0 AVENUE, TORRANCE,
Not all
however,
most functions
Pica (10 pitch)
Elite (12 pitch)
Compressed (17 pitch)
Double Width (5 pitch)
8.5 pitch
15 pitch
17.1 pitch
Super/Subscript
Boldface
Underlining
Variable Line Spacing
Automatic Option Tray selection
Multiple Copies Variable Control
Landscape Paper Handling
IBM Graphic Character Set
(not avail. in all fonts)
operating
PFT
the GQ-3500 PFT within
the functions listed and work properly.
intended to assist DisplayWrite 4
functions and capabilities will be
available through DW4 will
system (Refer to DW4 users
(Follow instructions
firmware
revision of
contained
the SYSTEM or USER
in it's entirety
The procedure
complete. The printer
CALIF. 90505