Replacing The Photoconductor Unit - Epson EPL-5700 Reference Manual

8. Gently press down on the printer cover until it clicks shut.
9. When turning on the printer, access the printer settings dialog
box in the printer driver, and click the Toner Level Clear
button. The Toner level clear dialog box is displayed.
10. Click OK to reset the toner level counter.
Whenever you replace the developer cartridge, you should
clean the paper roller as described in "Cleaning the inside of
the printer" on page 5-9.

Replacing the photoconductor unit

1. Make sure the printer is turned off.
2. Open the printer cover by pressing the latch on the left side
of the printer and lifting the cover up all the way.
5-6
Maintenance and Transportation