Adjusting Hand Alignment; Phone Finder - Casio 5659 Operation Manual

Swapping Your World Time and Home
●
Time
1. Y
Tap the "BABY-G Connected" icon.
2. X
Hold down (C) for at least three
seconds. Release the button when
[CNCT] and start to flash.
e
When a connection is established
between the watch and phone, [CNCT]
and will stop flashing and remain on the
e
display.
If connection fails for some reason,
●
[ERR] will appear on the display
momentarily and then the watch will
return to the Timekeeping Mode.
Trying to connect
3. Y
Perform the operation shown on the
phone screen to swap your Home Time
with your World Time.
Note
Auto time adjustment does not work for
●
24 hours after swapping of the Home
Time and World Time.
Watch Operation Guide 5659

Adjusting Hand Alignment

If the hands are out of alignment even though
auto time adjustment is being performed, use
BABY-G Connected to adjust them.
1. Y
Tap the "BABY-G Connected" icon.
2. X
Hold down (C) for at least three
seconds. Release the button when
[CNCT] and
When a connection is established
between the watch and phone, [CNCT]
and
display.
If connection fails for some reason,
●
[ERR] will appear on the display
momentarily and then the watch will
Connected
return to the Timekeeping Mode.
Trying to connect
3. Y
Perform the operation shown on the
phone screen to correct hand alignment.
start to flash.
e
will stop flashing and remain on the
e
Connected

Phone Finder

You can use phone finder to trigger a tone on
the phone to make it easy to find. The tone is
forced to sound even if the phone is in vibrate
mode.
Important!
Do not use this function in areas where
●
phone call tones are restricted.
The tone sounds at a high volume. Do
●
not use this function when listening to
phone output over earphones.
1. X
If the watch is connected with a phone,
press any button to terminate the
connection.
Connected Disconnected
2. X
If the watch is in any mode besides the
Timekeeping Mode, hold down (C) for at
least one second to enter the
Timekeeping Mode.
3. X
Hold down (D) for at least three
seconds. Release the button when [FIND]
starts to flash at low speed.
The phone will sound a tone when it
establishes a connection with the watch.
It will take a few seconds before the
●
phone tone sounds.
Preparing to search Searching for the
for the phone
4. X
Press any button to stop the tone.
You can press any watch button to stop
●
the phone tone only during the first 30
seconds after it starts to sound.
phone
12