Measuring Lap Times
1.
Enter the Stopwatch Mode.
Navigating Between Modes
l
If a split time measurement operation is
●
displayed, clear it before proceeding to
step 2.
Measuring a Split Time
l
2.
Press (A) to display [LAP].
Each press of (A) toggles between
●
[SPL] (split time) and [LAP] (lap time).
Minutes, seconds
3.
Use the operations below to measure
elapsed time.
Each time you press (A), the watch
●
displays the time elapsed (lap time)
since the last lap time operation,
alternating with the stopwatch number
for about eight seconds.
D
Start
A
Lap
D
Stop
4.
Press (A) to reset the stopwatch to all
zeros.
Watch Operation Guide 5659
The timer counts down from a start time
specified by you. A beeper sounds when the
end of the countdown is reached.
The beeper is muted when battery power is
●
low.
Using BABY-G Connected to
Configure Timer Settings
If the watch is paired with a phone, you can
also use BABY-G Connected to set the timer
start time.
Configuring Watch Settings
l
Timer
Setting the Countdown Start
Time
The start time can be set in 1-second units up
to 60 minutes.
If a timer countdown operation is in
●
progress, reset the timer to its current start
time before performing this operation.
Using the Timer
l
1.
Enter the Timer Mode.
Navigating Between Modes
l
2.
Hold down (A) for at least two seconds.
Release the button when the minutes
setting starts to flash.
This causes the minutes digits to flash.
This is the setting mode. The hands
●
automatically shift out of the way for
easy viewing of the display and other
indicators.
Minutes
3.
Use (B) and (D) to change the minutes
setting.
4.
Press (C).
This causes the seconds digits to flash.
Seconds
5.
Use (B) and (D) to change the seconds
setting.
6.
Press (A) to exit the setting screen.
Note
Setting a start time of 00'00 will perform
●
a countdown of 60 minutes.
20