Led Indicators - Supermicro SuperServer 5019S-W4TR User Manual

4.5 LED Indicators

LAN1/2 LEDs
The Ethernet ports (located beside the VGA port) have two LEDs. On each port, one LED
indicates activity when flashing while the other LED may be green, amber or off to indicate
the speed of the connection. The same indicator status applies to the dedicated IPMI LAN.
LAN1/2 Activity LED (Right)
LED State
Color Status
Green or Amber Flashing
Onboard Power LED
LED2 is an Onboard Power LED. When this LED is lit, it means power is present on the
motherboard. In suspend mode this LED will blink on and off. Be sure to turn off the system
and unplug the power cord(s) before removing or installing components
Standby Power LED
The 5V Standby Power LED is located at LED3 on the motherboard. When this LED is on, the
standby power is connected. Be sure to unplug the power cable before removing or installing
components. See the table below for more information.
Definition
LAN Activity
Onboard Power LED Indicator
LED Color Definition
Off System Off
Green System On
Standby Power LED Indicator
LED Color Definition
Standby Power Off
Off (power cable not
connected)
Green Standby Power On
51
Chapter 4: Motherboard Connections
LAN1/2 Link LED (Left)
LED State
LED Color Definition
Off No Connection/10 Mbps
Amber 1 Gbps
Green 100 Mbps