Table of Contents
Advertisement
Power LED
The Power LED connection is located on pins 15 and 16 of JF1.
NMI Button
The non-maskable interrupt button header is located on pins 19 and 20 of JF1.
Data Cables
The data cables in the system have been carefully routed to maintain airflow efficiency. If
you disconnect any of these cables, take care to re-route them as they were originally when
reconnecting them.
Important! Make sure the the cables do not come into contact with the fans.
Power Cables
The following power connections on the X11SSW-4TF must be connected to the power supply.
The wiring is included with the power supply. See Section 4.1 for details.
•
24-pin Primary ATX Power (JPWR1)
•
8-pin Processor Power (JPWR2)
Chapter 4: Motherboard Connections
Power LED
Pin Definitions (JF1)
Pin#
Definition
15
3.3V
16
Power LED
NMI Button
Pin Definitions (JF1)
Pin#
Definition
19
Control
20
Ground
45
Advertisement
Table of Contents
