Installing The Rails; Identifying The Sections Of The Rack Rails; Installing The Inner Rails - Supermicro SuperServer 5019S-W4TR User Manual

SuperServer 5019S-W4TR User's Manual

2.3 Installing the Rails

There are a variety of rack units on the market, which may require a slightly different assembly
procedure.
The following is a basic guideline for installing the system into a rack with the rack mounting
hardware provided. You should also refer to the installation instructions that came with the
specific rack you are using.

Identifying the Sections of the Rack Rails

You should have received two rack rail assemblies in the rack mounting kit. Each assembly
consists of two sections: an inner fixed chassis rail that secures directly to the server chassis
and an outer fixed rack rail that secures directly to the rack itself (see Figure 2-1). Two pairs
of short brackets to be used on the front side of the outer rails are also included.

Installing the Inner Rails

Both the left and right side inner rails have been pre-attached to the chassis. Proceed to the
next step.
Figure 2-1. Identifying the Sections of the Rack Rails
Warning: do not pick up the server with the front handles. They are designed to pull
the system from a rack only.
(right side rail shown)
20