Husky HOUC3304JX1 Use And Care Manual page 7

Assembly (continued)
5
Installing the cabinet
At least two people are needed for this step.
WARNING:
□ Carefully lower the cabinet (B) between the four support legs (F)
until each support leg is properly secured under the top lip of
the cabinet and the holes are in alignment.
7
Attaching the handles
NOTE: The holes in the tool cart are tapped and do not
require nuts.
□ Attach the side handle (C) to the tool cart using four
screws (AA). Do not over tighten.
6
□ Secure the cabinet (B) to the four legs (F) using twelve
□ Tighten all screws on the cart at this time. Be careful not
B
F
8
AA
C
7
Attaching the legs
screws (AA).
to over tighten.
AA
Installing the drawer liner
□ Place the drawer liners (O) in appropriately sized
drawers to protect the surface.
O
Pleas e contact 1-888-HD-HUSK Y fo r furthe r assistanc
B
F
HUSKYTOOLS.COM
e .