Getting Started - Motorola L501BT User Manual

1

Getting started

Step 1. Connect the base
Plug the power adapter with smaller round pin plug and telephone line cord into the base. Power adapter
-
with bigger round pin plug is for charger (for multi-handset pack only).
Plug the other end of the power adapter and telephone line cord into the wall jack.
-
Use only the provided power adapter.
-
Step 2. Install and charge the handset battery pack
Slide out the battery compartment cover. Place the supplied rechargeable battery pack in the battery
-
compartment, with the battery connector plugged in, as shown.
Slide the battery compartment cover back.
-
- Put the handset on the main pack base to charge for at least 24 hours. When the handset if fully charged,
the <Batter full icon> will indicate that it is fully charged.
IMPORTANT
Use only the rechargeable battery pack provided with the product.