Operation - Craftsman CMXGVAM1144036 Instruction Manual

NOTE: This Operator's Manual covers several garden tiller models. The tiller depicted
may differ from yours.
Engine Controls
For detailed information on all engine controls refer to the separate Engine
Operator's Manual.
Wheel Drive Pins
Each wheel is equipped with a wheel drive click pin that secures the wheel to the
wheel shaft. The wheels can be positioned in either a wheel drive or a freewheel
mode.
Forward Clutch Bail
The forward clutch bail controls the engagement of the forward drive of the wheels
and tines.
Reverse Handle Assembly (If equipped)
The reverse handle assembly controls the engagement of the reverse drive of the
wheels and tines.

OPERATION

Reverse Handle Assembly
(If Equipped)
Forward Clutch Bail
Depth Regulator Lever
Handlebar Height
Adjustment
Tines
Wheel Drive Pin
Figure 13
Depth Regulator Lever
This lever controls the tilling depth of the tines. Pull the lever back and slide it up or
down to engage the notched height settings.
Handlebar Height Adjustment
The handlebar height is adjustable to three different settings. In general, adjust the
handlebars so they are at waist level when the tines are 3-4" in the ground.
Emergency Stop Control (If Equipped)
The emergancy stop control is a switch used to stop the tiller engine and tiller
functions from the operator's position in emergency situations.
NOTE: Some engine models may also come equipped with an ignition ON/OFF
switch. Consult the separate engine operators manual.
10
Emergency Stop
Control
(If Equipped)