Table of Contents
Advertisement
4. Press the
OK
cycle and the message
Caution:
Never turn off the EPSON STYLUS CX5700F while head cleaning is in progress. You may
damage it.
5. When the display returns to
that the print head is clean. See page 49 for details.
6. If there are still gaps or lines, or the test patterns are faint, run another
cleaning cycle and check the nozzles again.
Note:
If you do not see any improvement after cleaning the print head four or five times, turn off
the EPSON STYLUS CX5700F and wait overnight. This lets any dried ink soften. Then try
cleaning the print head again. If quality still does not improve, one of the ink cartridges may
be old or damaged and needs to be replaced. See page 53 for details.
Caution:
If you do not use your EPSON STYLUS CX5700F often, it is a good idea to print a few pages at
least once a month to maintain good print quality.
Checking the Ink Levels
You can check the approximate level of ink in your cartridges using the control
panel.
1. Press the P
On
STYLUS CX5700F, or press the y
button until you see a screen like this:
2. Press the
Setup
3. Press the u or d button, or press the
numeric keypad, to display this option:
4. Press the
OK
If one or more cartridges are low on ink, you see a
display like this:
5. Press the
OK
If you need to replace an ink cartridge, see page 53.
button. The EPSON STYLUS CX5700F runs a head cleaning
Cleaning . . .
4.Head Cleaning
button to turn on the EPSON
button. You see this display:
button. You see a display like this:
or y
Cancel/Back
appears on the display.
, run a nozzle check to verify
Cancel/Back
key on the
2
button to return to the first screen.
Maintaining Your EPSON STYLUS CX5700F
21:00
1.Load/Eject
2.Ink Levels
C:50% M:50% Y:50
C:Ink low M:50%
Y
51
Advertisement
Table of Contents
