Power-Supply Unit Built-In Self-Test; Diagnostic Error Messages - Dell OptiPlex 7060 Tower Service Manual

Table 4. States Under Host BIOS Control (continued)
Amber LED state
3
3
3
3
3
3
3

Power-Supply Unit Built-in Self-Test

Built-in Self-Test (BIST) helps determine if the power-supply unit is working. To run self-test diagnostics on the power-supply
unit of a desktop or all-in-one computer, see the knowledge base article

Diagnostic error messages

Table 5. Diagnostic error messages
Error messages
AUXILIARY DEVICE FAILURE
BAD COMMAND OR FILE NAME
CACHE DISABLED DUE TO FAILURE
68 Troubleshooting
White LED state
1
2
3
4
5
6
7
System state
BIOS state 4
BIOS state 5
BIOS state 6
BIOS state 7
BIOS state 8
BIOS state 9
BIOS state 10
000125179 at www.dell.com/support.
Description
The touchpad or external mouse may be faulty. For an
external mouse, check the cable connection. Enable the
Pointing Device option in the System Setup program.
Ensure that you have spelled the command correctly, put
spaces in the proper place, and used the correct path name.
The primary cache internal to the microprocessor has failed.
Contact Dell
Notes
modules detected but failure
has occurred.
BIOS Post code (Old LED
pattern 0100) Combine PCI
device config or failure with
video sub sytem config or
failure. BIOS to eliminate 0101
video code.
BIOS Post code (Old
LED pattern 0110) Combine
storage and USB config or
failure. BIOS to eliminate 0111
USB code.
BIOS Post code (Old LED
pattern 1000) MEM config, no
memory detected.
BIOS Post code (Old
LED pattern 1001) Fatal
Motherboard error.
BIOS Post code (Old LED
pattern 1010) Mem config,
modules incompatible or
invalid config.
BIOS Post code (Old
LED pattern 1011) combine
"Other pre-video activity and
resource configuration codes.
BIOS to eliminate 1100 code.
BIOS Post code (Old LED
pattern 1110) Other pre-post
activity, routine subsequent to
video init.