2. Close the
front panel
3. Install the:
a.
Front bezel
b.
Side cover
4. Follow the procedure in
2.5-inch hard drive
Removing the 2.5–inch drive from the drive bracket
1. Follow the procedure in
2. Remove the:
a.
Side cover
b.
Front bezel
c.
2.5-inch hard drive assembly
3. To remove the drive:
a. Pull one side of the drive bracket to disengage the pins on the bracket from the slots on the drive [1].
b. Lift the drive out of the drive bracket [2].
door.
After Working Inside Your
Before Working Inside Your
Computer.
Computer.
Disassembly and reassembly
23