4
Plug In and Turn On
1
Plug the Stylus CX into a grounded electrical outlet.
Do not connect the USB cable yet.
2
Press and hold the On button until the green light comes on.
On button
5
Install Ink Cartridges
1
Lift up the entire scanner unit.
2
Shake the package of ink cartridges four or five times.
Then remove the cartridges from the package.
Caution: You must install all cartridges and leave them installed
for all types of printing. To avoid damaging the Stylus CX, never
move the print head by hand.
3
Lower each cartridge into
its holder as shown.
4
Press down on each cartridge
until it is firmly seated.
On
Error
Scan
Reset
Recall
Reset all(3sec)
Save(3sec)
Don't touch the green part
continue