Sony DNW-A100 Maintenance Manual page 20

1-6. Rack Mounting
. Mounting in rack
c
Have two or more persons to do this work.
(17)Stagger the ball retainers of intermediate rails on both
sides (left and right) toward you.
Ball retainer
(18)Pull the rails out equal length from both sides (left and
right) .
(19)Lift the unit holding the handles, insert the inner rails
into the intermediate rails slowly.
(20)While pressing the stoppers on the both sides (left and
right) , push the unit into the rack slowly.
n
Exercise care to avoid catching your finger or hand in
rack mount rail.
Stopper
Inner rail
1-8
Intermediate rail
Intermediate rail
Stopper
(21)Take the unit in and out from the rack about three
times and be sure that slide rail moves smoothly.
If slide rail does not move smoothly, remove the unit
and go back to "Attachment of outer rails"
(procedure12).
CAUTIONS
. Have two or more persons to remove.
. This unit does not have the feet in this operation.
When you put down this unit from the rack, be
careful not to give a shock to it.
(22)Fix the unit to the rack using two screws and two
ornamental washers.
Tighting torque: 1.2 N.m {12.2 kgf.cm}
Ornamental washer
RK5 x 14
RK5 x 14
Ornamental washer
DNW-A100/A50/A45
DNW-A100P/A50P/A45P